Look
Here for Information on
updated 12/11/09
|
 |
HORNS
Timberlines
horns are aluminum alloy for lighter weight but just as
tough as steel.
They range in size from 2 1/2" to 3 3/4" in height and 1
1/2" to 3" in cap size.
The #18 is the only size that will fit in the pommel of
the Law Man and the Timberline Officers Model.
The #23 is our most popular roping horn.
They can be polished but the most popular is leather
covered to match the saddle.
Click here to view horns |
 |
SADDLE LEATHER
Chestnut, Natural, Oxblood,
Brown, Rust & Black. Timberline Saddle Company uses only
top-quality vegetable tanned top-grain cowhide on its
saddles. These leathers have not been skived and buffed
to look perfect, but are Grade A hides with the full
top-grain intact to ensure strength, integrity and long
life.
We purchase our hides natural and undyed. Our "natural"
leather is then oiled to a light golden color which
darkens with time in the sun. We dye our own leather
using mineral based dyes which attain a saturation point
deep in the leather fibers.
The occasional blemish found in a natural smooth
leather saddle indicates that it is a natural, full
top-grain hide. Some blemishes, usually very slight, are
to be expected.
When you receive your saddle it will be oiled and ready
to go. We only use natural oils as not to damage the
integrity of your saddle leather. A continuance of this
care will ensure the life of your saddle for many years
to come!
Click here for Saddle Colors
|
 |
SKIRT OPTIONS
All Western Models are
standard with top grade bark-tanned sheepskin.
You can pick from round, square or semi square skirts.
We also have a Paso panel that is narrower and about the
same size as an endurance panel. These panels are great
or smaller horses or mules.
Our Endurance and English models are lined with a
fiber-incorporated material that is water resistant,
allows for air circulation, is light weight, and wears
like iron!
The spring skirt flexes as the shoulder rotates
eliminating wear at the front of your saddle skirts, not
to mention alleviating the irritation to your horse's
shoulder and withers.
These types of skirts enable the horse to move more
freely.
You may add sheepskin to the bottom of your Endurance
or English skirts.
Click here for more
|
|
 |
FENDERS & LEATHERS
As with everything Timberline Saddle Company offers,
fenders and leathers have their options as well! They
have heard the concerns of many different people over
the years and have adapted options to handle these
issues.
They offer a traditional fender,
along with fenders that won't hurt your ankles. they've
also come up with a small fender for the distance models
that eliminate pinching. For those who love the 2"
leather straps, those are available too!
Construction is surpassed by none. Their fenders and
leathers are made of top-grain cowhide, reinforced nylon
webbing and are lined with boot leather. This will keep
the sweat from going through your fender and protects
the fender. The nylon gives it strength without
stretching. Timberlines fenders and leathers are built
to last! All our fenders and leathers are made of
reinforced cowhide.
Click here for more |
 |
Cantles
You have the choice of of
a straight cantle binding, or Cheyenne roll on your
saddle. The standard on an endurance saddle is a roll
over cantle but you can opt for a straight cantle
binding or a cheyenne roll.
The cantle can be from 3 1/2" to 5 1/2" tall. Standard
height is 4" unless specified.
Click here for more
|
|
 |
Fork Overlays
Most western saddles and
some of the endurance models have an overlay on the
fork. There are full overlays and others are just a
simple roll bead on the front of the fork. There are
also options for fancy fork overlays. These overlays can
be the same color as the saddle or they can be a
contrast to match the seat. You decide.
Click here to view more
|
|
 |
Adjustable Rigging & Rear Billets
Standard with Western
Adjustable rigging. Rear flank billets with hoof pick
holder (order flank cinch below in Recommended Accessories
area). Three position Dropped Yoke Rigging is
available at an additional cost.
Click here for more |
Carvings
Click here
Border Tooling's
Click here
Lettering
Click here
|
Carvings and Tooling
All our tooling and
carving is done right here in the shop. We don't send
your saddle components across the country to be carved,
but keep it close at hand with our company of expert
craftspeople.
We "lift" the patterns, "bevel" and "detail" our work
like you seldom find in other Western saddles. Our
hand-carving patterns jump to life from your saddle.
We particularly recommend choosing our "Chestnut"
leather color when ordering our hand-carving. Like all
our hand dyed leathers, the Chestnut is soaked in
mineral-based dye until it has received the maximum
penetration within the leather fibers. Interestingly,
the dye molecules are the most dense deep in the leather
where they have "piled up" at the maximum saturation
point. What happens when the carving takes place is that
the leather is cut into this deepest penetration point,
providing a gorgeous "patina" in our hand-carved
patterns. The same is true with oxblood, brown, rust and
black, however chestnut provides the most natural
looking patina.
All of our leather colors can be tooled or hand carved.
We offer many styles of borders, partial carves and full
hand carves as well as several different styles of
letters and numbers. We can also do brands.
|
 |
SILVER OPTIONS
Enhance the beauty of your
saddle with our Silver Options. You have several
different types from which to choose. Montana Silver
Conchos come standard on all saddles (excluding the
Minute Man).
Note: we also take orders for custom silver. All custom
silver takes longer.
Click here to view more
|
 |
STIRRUP OPTIONS
Leather Covered
Bells
Nylon Bells with
side wraps
Leather Covered
Ropers
Nylon EZ rides
with side wraps
Leather Covered EZ Rides
Leather Covered
Overshoes
English Safety
Irons
Our "leather
covered"
stirrups are
very unique and
quite
time-consuming
to make. Built
on a light
weight nylon
core, these
stirrups are
covered with
leather to match
your saddle, wet
molded, clamped,
expertly sewn,
with all the
edges sanded,
waxed and
burnished.
Leather covered
stirrups can be
tooled to match
your saddle.
These are
beautiful!
The side wrapped
stirrups are
built on the
same light
weight nylon
core as the
leather covered
ones. The sides
are wrapped with
the same top
grain leather as
your saddle, and
laced together.
Timberline
stirrups are
comfortable with
a base of 1/2"
thick neoprene
foam topped with
a non-skid
surface that
absorbs more
concussion and
prevents more
foot pain than
you can imagine.
All stirrups
are available in
Natural, Rust,
Chestnut, Brown,
Rust, Oxblood
and Black.
The English
safety stirrups
all have 1"
tops.
Click here to view
|
|
|
